nrgSMART CONTROLLER

Holland Electronics’ nrgCONTROL-BT coordinates and collects data for up to 30 nrgSMART enabled PDUs. Panels are connected over a simple daisy chain connection. Only one IP address is required for all attached PDU panels to communicate circuit level current, voltage, temperature, alarm, and circuit threshold data. Data for all attached panels is accessed locally through the LCD screen or through the on-board configuration wizard. Data service including detailed analytic visualization is available through Telect’s hosted data service or can be interfaced to existing BMS or NMS systems over SNMP.

Inputs/Outputs
Connection to Configuration Wizard	10/100 Ethernet, RJ-45 Jack
Connection to Data Server	10/100 Ethernet, RJ-45 Jack
Connection to nrgSMART Panels	nrgNET
Supported Browsers	Chrome Firefox
Voltage Range (nominal)	-20V to -57V (nominal -48 VDC)
Input Power Wire Size	#18-12 AWG
Max. Operating Current	3A (80% of 4A fuse rating)
SD Card Capacity	4 Gigabytes
SD Card Type	Micro SD
Grounding
Earth GND terminal bolts (with washers) for dual-hole compression lugs	Two pair of 1/4-20 threaded holes on 5/8-in. centers. Torque bolts (using 7/16-in. or 12 mm wrench) to 50-in./lb. (5.5 N•m), max.
Environmental
Humidity	0 to 90%, non-condensing
Temperature	-5ºC to 55ºC (23ºF to 131ºF)
Mechanical
Dimensions	17″W x 1.73″H x 8.99″D
Weight	8.7 lbs. (10.7 lbs. shipping)
Material	cold-rolled steel
Finish	powder-coat
Color	pewter
Mounting	19″ or 23″ rack mounting, EIA and WECO
Compliance
Approvals	UL, NEBS level 3

Features:

Additional Information:

Related Products